Skip to main content

Archived content

NOTE: this is an archived page and the content is likely to be out of date.

Network Scanner fi-6000NS Update Software

Software Download

Applied Model and Software Revision

Note:

  • Please check the information below before downloading fi-6010N Software Update.

PA03544-B001 / PA03544-B002 / PA03544-B005

Scanner Model fi-6000NS
Scanner System Revision Older than en001 01.06.01.0004
fi Network Scanner Admin Tool Older than 02.04. 0004

PA03544-B011

Scanner Model fi-6000NS
Scanner System Revision Older than in001 01.04.01.0004
fi Network Scanner Admin Tool Older than 02.04. 0004

Download

PA03544-B001 / PA03544-B002 / PA03544-B005

Download File File Size
System Software Update Version en001 01.06.01.0004
[Download]  icon-downloadnsen001_0106010004.exe		 116MB
fi Network Scanner Admin Tool [Download]  icon-downloadnsen001_AdminTool_02040004.exe 1.75MB

Download

PA03544-B011

Download File File Size
System Software Update Version in001 01.04.01.0004
[Download]  icon-downloadnsin001_0104010004.exe		 54.9MB
fi Network Scanner Admin Tool [Download]  icon-downloadnsin001_AdminTool_02040004.exe 8.49MB

Modifications

[System Software Update]

Added Functions/improvements:

  • Windows® 8 / Windows Server® 2012 are supported.

[fi Network Scanner Admin Tool]

Added Functions/improvements:

  • Windows® 8 is supported.

Operating Procedures

[System Software Update]

  1. Download "fi-6000NS Updated Software" on the hard disk. Use the size of the file described above as reference for the required hard disk space.
  2. Execute downloaded file and then unzip the file on the hard disk.
  3. By using "Admin Tool", install "fi-6000NS updated software" which is unzipped by procedure.2 on fi-6000NS.

Note:
Depending on the system revision of scanner models, some versions of Internet Explorer (hereinafter referred to as IE) cannot be used on the computer when installing the update software.

System Revision IE8 Windows® 7
IE7 Windows Vista®
IE6 Windows® XP		 IE 9
Windows® 7		 IE 10
Windows® 8
en001 01.05.02.0001 or earlier Supported Unsupported(*1) Unsupported(*1)
en001 01.06.01.0004 or later Supported Supported Supported
in001 01.03.02.0001 or earlier Supported Unsupported(*2) Unsupported(*2)
in001 01.04.01.0004 or later Supported Supported Supported

*1 For example, you cannot connect the scanner whose system revision is en001 01.05.02.0001 from the computer that IE9 or IE10 has been installed on. As “Supported” shows in the above table, connect from the computer that the supported IE has been installed on, such as IE6, IE7, and IE8.
*2 For example, you cannot connect the scanner whose system revision is　in001 01.03.02.0001 from the computer that IE9 or IE10 has been installed on. As “Supported” shows in the above table, connect from the computer that the supported IE has been installed on, such as IE6, IE7, and IE8.

  • Please refer to the "Network Scanner fi-6000NS Operator's Guide" for the details on how to install updated software, how to use Admin Tool as well as those function details.

[fi Network Scanner Admin Tool]

  1. Download and double-click the fi Network Scanner Admin Tool executable. This creates a series of folders, one for each supported language, on the hard disk.
  2. Open the folder that matches your language and double-click the file "fi-AdminTool.msi" to install the program. If your language is not supported, install the English version of the program which is located in the folder "en". Details about fi Network Scanner Admin Tool is available from the following source"Network Scanner fi-6000NS Operator's Guide"

Top of Page


Software change history

Version en001 01.05.02.0001, Version in001 01.03.02.0001

The software has been updated to correspond to the spare part (LCD-UNIT).

Version en001 01.05.01.0003, Version in001 01.03.01.0003

A security update is provided. This security update makes the following security enhancements.

  • Respond to the operating system vulnerabilities
    The following security patches are provided by Microsoft.
No. KB number (*1)[ Threat level ] Malfunction Microsoft Security Bulletin number (*2)
1 KB978251
[ Urgent ]		 Vulnerabilities in SMB client could allow remote code execution. MS10-006
2 KB971468
[ Urgent ]		 Vulnerabilities in SMB Server could allow remote code execution. MS10-012
3 KB980232
[ Urgent ]		 Vulnerabilities in SMB client could allow remote code execution. MS10-020

(For details, refer to Microsoft Knowledge Base.)


  • Malicious Software Removal Tool
    This tool checks if there is any malicious software and removes the infections accordingly.
No. KB number (*1) Description
1 KB890830 Tool which removes the infected software.(Version 3.8)

(For details, refer to Microsoft Knowledge Base.)


Note
*1: The Microsoft Knowledge Base article ID number
*2: The Microsoft Security Bulletin provides updated content to the article referenced by the corresponding KB number



The following malfunctions have been modified.

  • Folder setting cannot be carried out when all the following conditions are met.

    • Path name is specified by direct input.
    • User who previously did the folder setting can log in the file server.
    • User does not have access rights to the folder to be added.

Version en001 01.05.01.0002, Version in001 01.03.01.0002

The following contents have been modified.

  1. The delay in the synchronization with NTP server has been fixed.
  2. TWAIN driver log can be acquired when the "Information Output Level" is set to 1.
  3. The message will no longer appear, when the user logs into the scanner (via the touch panel) as an administrator from the login screen.

Version en001 01.04.01.0001, Version in001 01.02.01.0001

Scanner time/date can be automatically updated when the scanner is started up.

Version en001 01.03.01.0004

Application Program Interface and SDK(Software Development Kits) function is added.
Authentication Processing to the Network folder is Corrected.
Apply the .NET Framework updates.

Version en001 01.02.01.0009

  1. A dedicated application to configure the settings is used instead of Web browser when setting up the environment via network.
  2. Print function is added.
  3. The time required to obtain LDAP List is shortened.
  4. Modified not to initialize the status of "Scan Viewer".

Version en001 01.01.01.0030

No. Error details Condition of occurrence Cause/Contents of change
1 The output images turn rough in B&W scanning. When scanned by Binary Image output. Binary algorithm is modified to improve image quality.
2 Network folder setting window is not displayed. When over 400 components are being displayed within the network folder setting. Modified to be able to specify the folder directly from network path view.
3 Error code F309002A is displayed when "Save to folder" is repeated. When files are saved at 600dpi. Modified to prevent untoward memory access when scanning at 600 dpi.
4 Login screen and User Log screen overlap and cause the system to freeze. Upon recovery from Standby mode, after entering Standby from the User Log screen. Transition to Standby mode is modified for cases where the User Log window does not disappear.
5 It automatically logs out on the web console Administrator window. When the user strikes keys in order of Tab --> Enter, in a window i.e. System Status where no buttons/items are available to click on. Modified to disable the TAB key to prevent logging out by the "On before unload" processing (which is initiated by clicking on "Close" button when the system is reconnecting).
6 A message does not disappear in fi-6000NS and indicates that another user is logged in. 1) Log into web browser
2) Download manual
3) Close web browser because it does not transit from the message
"Logging in...".		 While the indicator "Logging in..." is displayed (when the user clicks on Login), the Manual Download button can be clicked as well. It is modified to disable Manual Download button while the indicator is lit (and enabled after the indicator is off).
7 81001001 (Error Code-06020400) is displayed in the System Log. When the System Setting File is reset to factory default. Modified to avoid "Thread Abort Exception" in the returning-to-Login window process.
8 In web browser, the Download Manual button disappears from the screen. When the user clicks on the Download Manual button twice. Modified not to let the Download Manual button disappear when it is clicked on twice.
9 Dos window and Explorer window overlap on top of the Login Screen and cause it to freeze. When the user strikes Enter to recover from Standby mode. Recovery process has been added because it occasionally fails to close window.
10 Application error 1. Login as LDAP user and select "Send mail".
2. Disconnect fi-6000NS.
3. Open E-mail address book.
4. Click on OK when the message
"Cannot connect to the LDAP server" is displayed.
5. Select E-mail address list (displayed in light blue) after the transit to E-mail address edit window.		 The state of "not being connected to LDAP Server" was left out of consideration while LDAP search is being processed to display LDAP List. It is now modified not to recognize it as an application error.
11 The texts are garbled in Administrator window. When the System Setting File menu is selected after backing up User Data Store. Modified to complete the connection of User Data Store backup without receiving the System Setting File menu window, in order to prevent texts from getting garbled.
12 The setup items of the Maintenance Log are disabled. Right after downloading the Maintenance information. No input could be made right after downloading the maintenance information because the Maintenance Information window would remain on "Loading page". This error has been modified.
13 When selecting a network folder, if the user selects a directory e.g. "麤", it will state that it is unable to access the specified network path because it is invalid. When the network folder has been selected. The library is modified to support Unicode.
14 Application error 1. Login as LDAP user and select "Send mail".
2. Disable the currently logged-in user's account.
3. Open address book.
4. Click on OK when a message states that the account is disabled.
5. Select E-mail address list (displayed in light blue) after the transit to E-mail address edit window.		 The state of "not being connected to LDAP Server" was left out of consideration while LDAP search is being processed to display LDAP List.
It is modified not to cause program errors when;
(1) the account is disabled
(2) it is disconnected to LDAP

Top of Pagetop fo page

Contact Us

Contact us

Where to Buy

Find a reseller Find a local reseller.
fi series products site

What's new

  • Software
  • FAQ