Skip to main content

Archived content

NOTE: this is an archived page and the content is likely to be out of date.

fi-7600 / fi-7700 / fi-7700S Firmware Update

Firmware is a set of software that controls a computer system (or hardware) stored in an electronic equipment.
This firmware, which is stored in each scanner device, controls the scanner’s performance.

Main Revision of 0W00 (Last Update: December/8/2023)

  • Correction of the problem that the bottom edge of the image is missing when reading FB. (Only fi-7700/7700S).
  • Improvement of vertical line distortion during FB reading.(Only fi-7700/7700S).
  • Correction of read defects during long page reading.

Main Revision of 0V00 (Last Update: July/27/2023)

  • Support for the Simplified Chinese fonts (GB18030-2022).
  • Correction of the problem with the SoC JPEG compression module.

Main Revision of 0P00 (Last Update: May/12/2020)

  • False detection of imprinter paper jam.

Main Revision of 0N00 (Last Update: September/25/2019)

  • Fixed the USB communication error occuring with connection to a USB 2.0 port of specific computer models.

Main Revision of 0K00 (Last Update: September/4/2018)

  • Increased scanning performance for certain types of paper.

Main Revision of 0G00 (Last Update: December/12/2017)

   The following improvement and correction have been made:

  • Imprinter (fi-760PRB) is now supported.
  • Corrected the optical error that occurred under a certain condition.