ScanSnap Manager for Mac Update (V6.2L22)

Target Scanner Models

ScanSnap SV600 / iX500

Target Operating Systems

• OS X v10.9 (Mavericks)
• OS X v10.8 (Mountain Lion)
• Mac OS X v10.7 (Lion)
• Mac OS X v10.6 (Snow Leopard) (iX500 only)

Modifications

Fixed Malfunctions:
Our company has designed and manufactured “ScanSnap SV600” the color-image scanner, intending to conform to the standard of “Class B Information Technology Equipment” ^* in CISPR22 which is the international standard for radio interference, however radio waves surpassing this standard were emitted in ScanSnap SV600 in some countries. To solve this problem, our company has provided the following modification:

• ScanSnap SV600 firmware has been updated for better stability. (SV600 only)
• Default output level for camera (R color component) has been changed. (SV600 only)

* “Class B Information Technology Equipment (ITE) is intended primarily for use in the domestic environment (…) A domestic environment means an environment where broadcast radio and television receivers might be used within a distance of 10 meters from the ITE concerned, in other words, a residential environment.”

Target Scanner and Outline
[Target Scanner]
ScanSnap SV600 (All units that has been sold since September 2013)

[Outline]
The permissible limit (limit of radiated emissions in CISPR22) and the measured value in ScanSnap SV600 are as below:
Limit of “Class B ITE” standard:
37dBμV/m (in 10m-range electric field strength, frequency ranges from 230 to 1000 MHz)
Measured value in ScanSnap SV600: 43-47dBμV/m (ditto)

In general there is little possibility of the negative effect for ITE such as a computer since ITE is designed not to be affected by about 1000 times stronger radio waves than the ones SV600 emits, following the standard of IEC61000.

For the software update history, see Readme.

Download

Download the software update to your hard disk by clicking the "Download" link below.

[Notice]
Apply this update to install the latest version of ScanSnap Manager for Mac.

Installation Procedures

Note:
If you perform the update online, the following procedure will not be necessary. Follow the instructions on the online update screen.

How to update

1. Be sure you log into Mac OS X / OS X as a user with administrator privileges.
2. Download "MacScanSnapV62L22UpWW.dmg" onto your hard drive.
   Make sure you have enough free disk space (at least more than twice the download file size) for installing the programs.
3. Quit any applications that are running on your computer.
4. Execute the downloaded "MacScanSnapV62L22UpWW.dmg" file to start the update installation.
5. Execute "MacScanSnapV62L22UpWW.pkg" that is deployed from the .dmg file to start the update installation.
6. Follow the instructions from the Installation Wizard to complete the installation. Select [Open] when the message "xxxxx is an application downloaded from the Internet. Are you sure you want to open it?" appears during installation.

Now that you have completed the update, please refer to the Readme file prior to use.