Turning the ScanSnap On

  1. Turn on the computer.
    HINT

    For iX1600/iX1500/iX1300/iX500/iX100, if you connect the ScanSnap and a mobile device via a wireless LAN and then scan a document, you do not have to turn on the computer.

    • The computer starts up and the ScanSnap Manager icon Not Communicating appears in the Dock.
      Dock
    HINT
    • If the ScanSnap Manager icon Not Communicating is not displayed in the Dock, click [Applications] from the sidebar in Finder, click [ScanSnap], and then double-click [ScanSnap Manager].
    • If ScanSnap Manager does not automatically start when you log in to the computer, display the [System Preferences] window and select [Users & Groups] → [Current User] → [Login Items] → [Add] → [ScanSnap] → [ScanSnap Manager].
  2. Turn on the ScanSnap.

    iX1600/iX1500

    Open the ADF paper chute (cover) of the ScanSnap.

    Turning On
    • The touch panel is activated.

    iX1400

    Open the ADF paper chute (cover) of the ScanSnap.

    Turning On
    • The [Scan] button flashes in blue. The button returns to being lit normally when document scanning is enabled.

    iX1300

    The ScanSnap is turned on by performing one of the following operations.

    • Holding the right side of the ADF paper chute (cover) then opening it

      Open the ADF paper chute (cover) fully so that the [Scan] button lights up in blue.

      When the ADF paper chute (cover) is opened, the extension will rise automatically.

      Turning On
    • Pressing the [Scan] button
      Turning On
    • Inserting a document into the manual feeder

      When a document is inserted into the manual feeder, the document is fed into the ScanSnap and is held firmly.

      If you press the [Scan] button with the document held firmly in the ScanSnap, it starts scanning.

      Turning On
      HINT

      If the ScanSnap has been set to turn on by inserting a document into the manual feeder, inserting a document such as a semi-transparent document (e.g. tracing paper), thin document, or transparent sheet may not turn on the ScanSnap.

      If the ScanSnap is not turned on, perform one of the following to turn it on.

      • Opening the ADF paper chute (cover)
      • Pressing the [Scan] button

    iX500/S1300i

    Open the ADF paper chute (cover) of the ScanSnap.

    Turning On

    Example: iX500

    • The [Scan] button flashes in blue. The button returns to being lit normally when document scanning is enabled.

    iX100/S1100i

    Open the feed guide of the ScanSnap.

    Turning On

    Example: iX100

    • The [Scan/Stop] button flashes in blue. The button returns to being lit normally when document scanning is enabled.

    Press the [Scan] or [Stop] button on the ScanSnap.

    Turning On
    ATTENTION

    When turning the power on, do not cover the white sheet with a hand.

    • The [Scan] button lights up in blue.

    When the ScanSnap is turned on, the ScanSnap Manager icon in the Dock changes from Not Communicating to Communicating.

    ATTENTION

    For iX1600/iX1500/iX1400/iX1300/iX500/iX100/S1300i/S1100i, with some computers, the initialization of the ScanSnap may be performed several times when the computer is started up depending on some computers.

    HINT
    • It may take more time for the ScanSnap Manager icon in the Dock to change to Communicating depending on computer performance, operating environment, or loading, for example, when many software programs are running at the same time.
    • When the ScanSnap is turned on, a notification window notifies you of the ScanSnap's communication status.
      To disable notifications of the ScanSnap's communication status, change the setting in the following procedure:
      1. Click the ScanSnap Manager icon Communicating in the Dock while holding down the [control] key on the keyboard, and then select [Preferences] from the ScanSnap Manager Menu.
        • The [ScanSnap Manager - Preferences] window appears.
      2. Clear the [Notify of the communication status] checkbox in the [Status Display] list.