[Display and set the ScanSnap information] Screen

You can display the wireless LAN information and wireless network configuration for the ScanSnap.

The displayed contents vary depending on the wireless mode that has been selected when [Display and set the ScanSnap information] is selected.

This screen only exists in Wireless Setup Tool.

This window consists of the following:

Access Point Connect Mode

[Refresh] button

Updates the information.

Diagnoses the communication status between the ScanSnap and wireless access point.

If the ScanSnap and the computer are not connected via a USB cable, this button is unavailable.

HINT

The wireless settings for each wireless access point can be diagnosed from the [Destination setting] screen.

Wireless LAN information

The following information is displayed:

Wireless mode

This is for iX1600, iX1500, iX1300, or iX100.

Displays the wireless mode that is currently selected.

Status

Displays the connection status between the ScanSnap and the mobile device.

Signal strength

Displays the strength of the signal that the ScanSnap is receiving from the wireless access point.

Icon	Signal strength
	No signal
	Weak
	Medium
	Strong

Network Name (SSID)

Displays the network name of the wireless access point.

Security protocol

Displays the security protocol set for the wireless access point.

Encryption method

Displays the encryption method set for the wireless access point.

Authentication Method

Displays the authentication method set for the wireless access point when IEEE 802.1X authentication is used.

Communication mode

This is for iX500.

Displays the communication mode for the ScanSnap and the mobile device.

Operation mode

Displays the operation mode for the ScanSnap and the mobile device.

For iX1600, iX1500, or iX1300, the frequency for the connection is also displayed.

Communication channel

Displays the communication channel for the ScanSnap and the mobile device.

Network information

The following information is displayed:

Scanner name: Displays the name of your ScanSnap.
Configuration method: Displays how the ScanSnap's IP address is set.
IP address: Displays the ScanSnap's IP address.
Subnet mask: Displays the subnet mask of the network that the ScanSnap is connected to.
Default gateway: Displays the default gateway on the network that the ScanSnap is connected to.
MAC address: Displays the ScanSnap's MAC address.

[ScanSnap setting] button

The [ScanSnap setting] screen is displayed.

Set a name and other information for the ScanSnap.

For iX500 or iX100, you can also set a password for connecting to the ScanSnap.

[OK] button

Closes the window.

Direct Connect Mode (iX1300/iX100)

[Refresh] button

Updates the information.

Wireless LAN information

The following information is displayed:

Wireless mode: Displays the wireless mode that is currently selected.
Network Name (SSID): Displays the network name set for the Direct Connect mode.
Network Name (SSID) Notification: Displays the notification setting of the network name set for the Direct Connect mode.
Security protocol: Displays the security protocol set for the Direct Connect mode.
Encryption method: Displays the encryption method set for the Direct Connect mode.
Communication channel: Displays the communication channel set for the Direct Connect mode.

Network information

The following information is displayed:

scanner name: Displays the name of your ScanSnap.
MAC address: Displays the ScanSnap's MAC address.
IP address: Displays the ScanSnap's IP address.
Subnet mask: Displays the subnet mask of the network that the ScanSnap is connected to.
DHCP Server: Displays the setting for the DHCP server.

[ScanSnap setting] button

The [ScanSnap setting] screen is displayed.

Set a name and other information for the ScanSnap.

For iX100, you can also set a password for connecting to the ScanSnap.

[OK] button

Closes the window.