[Check wireless network setting] Screen
You can display the wireless LAN information and wireless network configuration for the ScanSnap.
This window consists of the following:
For iX2500/iX1600/iX1500/iX1300
- [Refresh] button
Updates the information.
- Wireless LAN information
The following information is displayed:
- Wireless mode
Displays the wireless mode that is currently selected.
- Status
Displays the connection status between the ScanSnap and the mobile device.
- Signal strength
Displays the strength of the signal that the ScanSnap is receiving from the wireless access point.
Icon
Signal strength
No signal
Weak
Medium
Strong
- Network Name (SSID)
Displays the network name of the wireless access point.
- Security protocol
Displays the security protocol set for the wireless access point.
- Encryption method
Displays the encryption method set for the wireless access point.
- Authentication Method
Displays the authentication method set for the wireless access point when IEEE 802.1X authentication is used.
- Operation mode
Displays the operation mode for the ScanSnap and the mobile device.
- Communication channel
Displays the communication channel for the ScanSnap and the mobile device.
- Network information
The following information is displayed:
- Scanner name
Displays the name of your ScanSnap.
- Configuration method
Displays how the ScanSnap's IP address is set.
- IP address
Displays the ScanSnap's IP address.
- Subnet mask
Displays the subnet mask of the network that the ScanSnap is connected to.
- Default gateway
Displays the default gateway on the network that the ScanSnap is connected to.
- MAC address
Displays the ScanSnap's MAC address.
- [Next] button
This button appears for the Wireless Network Setup Wizard. Proceeds to the next screen.
- [Discontinue] button
This button appears for the Wireless Network Setup Wizard. It discontinues the setup while enabling the settings that you have configured up to this point.
A confirmation window appears.
For iX100
- [Refresh] button
Updates the information.
- Wireless LAN information
The following information is displayed:
- Status
Displays the connection status between the ScanSnap and the mobile device.
- Signal strength
Displays the strength of the signal that the ScanSnap is receiving from the wireless access point.
Icon
Signal strength
No signal
Weak
Medium
Strong
- Network Name (SSID)
Displays the network name of the wireless access point.
- Security protocol
Displays the security protocol set for the wireless access point.
- Encryption method
Displays the encryption method set for the wireless access point.
- Authentication Method
Displays the authentication method set for the wireless access point when IEEE 802.1X authentication is used.
- IP address information
The following information is displayed:
- Configuration method
Displays how the ScanSnap's IP address is set.
- IP address
Displays the ScanSnap's IP address.
- Subnet mask
Displays the subnet mask of the network that the ScanSnap is connected to.
- Default gateway
Displays the default gateway on the network that the ScanSnap is connected to.
- ScanSnap information
The following information is displayed:
- scanner name
Displays the name of your ScanSnap.
- Password
Displays the password for connecting to the ScanSnap.
The actual password may be shown or hidden depending on whether the [Show password] checkbox on the [ScanSnap setting] screen is selected.
- [Next] button
This button appears for the Wireless Network Setup Wizard. Proceeds to the next screen.
- [OK] button
Closes the window.