Documents That Can Be Loaded Directly into iX1300
When loading a document directly in the ScanSnap, the conditions for documents that can be loaded vary depending on the scanning method.
- For U-turn Scan
-
The type, weight, and size of a document that can be loaded in the ADF paper chute (cover) and scanned are as follows:
Document type
Office paper such as wood-free paper, wood-containing paper, and PPC paper (recycled paper)
Paper weight
40 to 128 g/m2 (11 to 34 lb)
A6 or smaller size paper: 40 to 209 g/m2 (11 to 56 lb) (*1)
A8 or smaller size paper: 128 to 209 g/m2 (34 to 56 lb) (*1)
Paper size
- Width
-
50.8 to 215.9 mm (2 to 8.5 in.)
- Length
50.8 to 355.6 mm (2 to 14 in.)
For long page documents, up to 1,117 mm (43.97 in.) (*2)
*1: For thick documents, inserting a document into the manual feeder and performing a scan is recommended.
*2: The length of a document that can be scanned varies depending on the setting for [Scanning side].
For details, refer to Scanning Long Pages (iX1300).
- For Return Scan
The type, weight, and size of a document that can be inserted into the manual feeder and scanned are as follows:
Document type
Office paper such as wood-free paper, wood-containing paper, and PPC paper (recycled paper)
Plastic cards conforming to the ISO7810 ID-1 type (54 × 86 mm/2.1 3.4 in.)
Paper weight
20 to 413 g/m2 (5.4 to 110 lb)
Plastic cards: 1.4 mm (0.06 in.) or less (embossed cards can be used)
Paper size
- Width
-
50.8 to 215.9 mm (2 to 8.5 in.)
- Length
50.8 to 355.6 mm (2 to 14 in.)