Changing the Profile (iX1600/iX1500)
In ScanSnap Connect Application, you can change the profile for scanning while your mobile device is directly connected to iX1600 or iX1500.
The procedure to change the profile is as follows:
-
Tap the [Settings] button (for iPhone/iPod touch, ) on the [File List] screen or do the same thing on the folder screen with the ScanSnap Sync function set to on.
The [Settings] screen appears.
-
Tap [Profile] in the [Settings] screen.
Available profiles appear.
- Change the profile as needed.
HINT
For configurable items in [Profile], refer to the following: