Connecting in Direct Connect Mode (iX1600/iX1500)
The ScanSnap transmits the network name (SSID) instead of a wireless access point. To connect a mobile device to the ScanSnap directly via wireless LAN, establish a connection with the network name (SSID) of the ScanSnap from the Wi-Fi settings on the mobile device.
Note that the ScanSnap does not have a wireless access point function or a router function. Therefore, a mobile device that is connected to the ScanSnap via a direct connection cannot be connected to the Internet or other devices via wireless LAN.
-
On the touch panel of the ScanSnap, press
in the home screen.
The [Settings] screen appears.
-
Press
.
The [Wi-Fi settings] screen appears.
-
Press [Wi-Fi connect mode].
The [Wi-Fi connect mode] screen appears.
-
Select [Direct connection].
The ScanSnap is set to Direct Connect mode.
-
Press
twice.
The [Settings] screen appears.
-
Press
.
The [Connecting Devices] screen appears.
-
Open the screen for setting the Wi-Fi function on the mobile device.
For details, refer to the manual of the mobile device.
- Enter the network name (SSID) and security key that are displayed in the [Connecting Devices] screen in the window for setting the Wi-Fi function.
The ScanSnap and the mobile device are connected directly.