To Continue Scanning
You can continue scanning only when the error message appears in the following cases:
- For iX1300 - No document was detected in either the ADF paper chute (cover) of the manual feeder. 
- Paper jam occurred. 
- The ADF top section or the top cover is open. 
- The Carrier Sheet, Photo Carrier Sheet, or Booklet Carrier Sheet has been loaded or inserted. 
- You tapped on [Tap here to cancel] during scanning. 
- A scan was stopped by the paper protection function. 
- Dirt was detected on the document sensor(s). 
- Documents have been loaded in the ADF paper chute (cover) and inserted in the manual feeder. 
 
- For models other than iX1300 - No document was detected in the ADF paper chute (cover). 
- Paper jam occurred. 
- The ADF top section or the top cover is open. 
- A Carrier Sheet or Photo Carrier Sheet has been loaded. 
- You tapped on [Tap here to cancel] during scanning. 
 
To continue scanning, perform the following.
- 
										Load the remaining pages in the ScanSnap.
										ATTENTIONRemove any pages inside the ScanSnap. 
- 
										Tap the [Continue] button to resume the scan.
										Scanning resumes. The scanned image is saved when the scanning is completed. 



