FUJITSU TWAIN32 Version 9.21.1600

Supported Scanner Models

  • fi-60F / fi-6130 / fi-6230 / fi-6140 / fi-6240 / fi-5110C


  • Windows® 10 Home (32-bit / 64-bit) *1
  • Windows® 10 Pro (32-bit / 64-bit) *1
  • Windows® 10 Enterprise (32-bit / 64-bit) *1
  • Windows® 10 Education (32-bit / 64-bit) *1
  • Windows® 8.1 (32-bit / 64-bit)
  • Windows® 8.1 Pro (32-bit / 64-bit)
  • Windows® 8.1 Enterprise (32-bit / 64-bit)
  • Windows® 8 (32-bit / 64-bit)
  • Windows® 8 Pro (32-bit / 64-bit)
  • Windows® 8 Enterprise (32-bit / 64-bit)
  • Windows® 7 Home Premium (32-bit / 64-bit)
  • Windows® 7 Professional (32-bit / 64-bit)
  • Windows® 7 Enterprise (32-bit / 64-bit)
  • Windows® 7 Ultimate (32-bit / 64-bit)
  • Windows Vista® Home Basic (32-bit / 64-bit)
  • Windows Vista® Home Premium (32-bit / 64-bit)
  • Windows Vista® Business (32-bit / 64-bit)
  • Windows Vista® Enterprise (32-bit / 64-bit)
  • Windows Vista® Ultimate (32-bit / 64-bit)
  • Windows® XP Home Edition (32-bit)
  • Windows® XP Professional (32-bit / 64-bit)
  • Windows® 2000 Professional
  • Windows Server® 2012 R2 Standard (64-bit)
  • Windows Server® 2012 Standard (64-bit)
  • Windows Server® 2008 R2 Standard (64-bit)
  • Windows Server® 2008 Standard (32-bit / 64-bit)
  • Windows Server® 2003 R2 Standard Edition (32-bit / 64-bit)
  • Windows Server® 2003 Standard Edition (32-bit / 64-bit)
  •     *1 
    Except fi-5110C

Contents of change

Version 9.21.1600
Corrected issues:
  • Fixed the issue where an application error might occur when the driver received both DisableDS and CloseDS before receiving OpenDS from an application on Windows® 8.1 or later.
  • Fixed the issue where a gamma pattern parameter specified for any of the following image types might be also applied to the other image types: binary, gray, or color.
  • Fixed the issue where an application error might occur when the TWAIN driver was used while six or more units of fi Series scanners were being connected.
Version 9.21.1509
Corrected issues:
  • Fixed the defect that the driver is not available until the OS is rebooted when the driver ended abnormally because of communication error, etc. in the Thin Client environment during scanning.
  • Fixed the defect that the application does not informed of the correct size of image when [Rotation degree: Automatic] or [Automatic Page Size Detection] is selected and scanning in the Memory Transfer mode on the flatbed scanner.
  • Fixed the defect that error occurs when “CAP_PRINTER” is issued by the scanner equipped with the imprinter.
  • Fixed the defect that [Blank Page Skip] is disabled when “CAP_AUTOSCAN” is issued.
  • Fixed the defect that the driver hangs up when it is closed in the middle of scanning with documents still left on the ADF paper chute.
  • Fixed the defect that the Software Operation Panel hangs up when it is launched while the driver is being used.

Driver download and installation

Download the driver to your hard disk by clicking the "Download" link below.

Version 9.21.1600

[Download]  Ft9l18gX1.exe (size: 60.4 MB)

Download file has been a self-extracting format.

By executing the downloaded "Ft9l18gX1.exe" file, program will be extracted in the same directory where the file exists. In case there is an existing driver, uninstall it before executing the file. Execute the "Setup.exe" in the created "¥Disk1" directory to start the driver installation.

For driver installation, please follow the Installation Guide. The functions and operation of the driver are in the " User's Guide (2.39 MB )" (size: 2.4 MB) or "TWAIN driver help". (The "User's Guide", requires Adobe® Reader® 5.0 or later.)
If necessary, you can download it from: Open

This driver can be used only with the supported scanner models. This update is not required if there is no problem in your operating environment.
Before installation, please log in as administrator first.

For technical inquiries, please contact the seller where you purchased the scanner.

Top of Page