Connecting the ScanSnap to a Wireless LAN (iX1300 / iX500 / iX100)
The ScanSnap Wireless Setup Tool is an application to configure the wireless settings required for connecting your ScanSnap via wireless LAN in a wizard format. The ScanSnap Wireless Setup Tool can be used to configure and check the following wireless LAN settings and connection.
- Connecting the ScanSnap to a wireless access point
- Registering the computer that will be connected to the ScanSnap via wireless LAN (iX500/iX100)
- Setting the IP address, name, and password for the ScanSnap
- Checking the connection between the ScanSnap and the computer (iX1300/iX100)
- Checking the connection between the ScanSnap and the mobile device
Follow the procedure below to start the ScanSnap Wireless Setup Tool and configure the wireless settings.
- Start the ScanSnap Wireless Setup Tool.
- Windows 11
Select [Start] menu → [All apps] → [ScanSnap Manager] → [ScanSnap Wireless Setup Tool].
- Windows 10
Select [Start] menu → [ScanSnap Manager] → [ScanSnap Wireless Setup Tool].
- The ScanSnap Wireless Setup Tool will start running.
- Windows 11
- Click the [Wireless Network Setup Wizard] button
in the main menu.
- The Wireless Network Setup Wizard appears.
- Follow the instructions in the Wireless Network Setup Wizard to configure the wireless settings.
For iX1300/iX100, configure and check the wireless settings based on the wireless LAN environment in which the ScanSnap is used.
HINT
- For details and operation of ScanSnap Wireless Setup Tool, refer to the ScanSnap Wireless Setup Tool Help.
- The ScanSnap Wireless Setup Tool is also started up when the ScanSnap software is installed.