What You Can Do with iX1300
Scanning Multiple Documents (U-turn Scan)
A document stack with a thickness of 2 mm (0.08 in.) or less (for A4 or smaller sizes: up to 20 sheets with 80 g/m2 [20 lb] paper weight) can be loaded into the ScanSnap for scanning.
For details, refer to Scanning Documents (iX1300).

Scanning One Document at a Time (Return Scan)
Documents such as business cards, post cards, and thick documents (e.g. plastic cards and booklets) can be inserted one by one for scanning.
After scanning a document is completed, when you insert the next document in the ScanSnap, the next scan is started automatically, which enables you to scan continuously.
For details, refer to Scanning Documents (iX1300).

Scanning Documents Larger Than A4 or Letter Size by Directly Inserting Them in the ScanSnap
By folding an A3, B4, or Double Letter size document in half and scanning it, the scanned images of both sides can be merged as a single image automatically.
Scanned images can be merged only when there is text, diagram, or a table on the fold line of the folded document.
For details, refer to Scanning Documents Larger Than A4 or Letter Size by Directly Inserting Them in the ScanSnap (iX1300).

Scanning Documents That Cannot Be Loaded Directly in the ScanSnap
You can use the optional Carrier Sheet to scan the following documents.
- Documents that are larger than A4/Letter size and not larger than A3 size
For details, refer to Scanning Documents Larger than A4 or Letter Size with the Carrier Sheet (iX1300).
- Documents that can be damaged quite easily such as photographs, or non-standard size documents such as clippings
For details, refer to Scanning Documents Such as Photographs and Clippings (iX1300).
Connecting the ScanSnap via Wireless LAN
You can connect the ScanSnap and a computer or mobile device via wireless LAN.
To configure the wireless settings for the ScanSnap, use the ScanSnap Wireless Setup Tool, which is installed together with ScanSnap Manager, or use the touch panel of the ScanSnap.
For details, refer to Connecting the ScanSnap via Wireless LAN (iX1300 / iX500 / iX100).
