Connecting the ScanSnap to a Computer in Access Point Connect Mode (iX1600 / iX1500)
Configure the wireless settings for the ScanSnap in the ScanSnap Wireless Setup Tool Wizard or on the touch panel to complete the preparation for connecting the ScanSnap to a computer.
For details, refer to the following:
- Connecting the ScanSnap to a Wireless Access Point by Using the ScanSnap Wireless Setup Tool (iX1600 / iX1500)
- Connecting the ScanSnap to a Wireless Access Point from the Touch Panel (iX1600 / iX1500)
The following explains how to connect the ScanSnap and a computer when the wireless settings for the ScanSnap have already been configured.
- Disconnect the USB cable connecting the ScanSnap to the computer.ATTENTION
If the ScanSnap Manager icon is
, exit ScanSnap Connect Application on the mobile device.
- The ScanSnap is automatically connected to the computer via wireless LAN and the ScanSnap Manager icon changes to
.
If the icon does not change, go to step 2.
HINT- If the [Connect automatically to previous ScanSnap by Wi-Fi] checkbox is selected and the previously connected ScanSnap is available for the connection, the computer is connected to the ScanSnap automatically.
- The computer can be connected to only one ScanSnap.
- Only one computer can be connected to the ScanSnap via wireless LAN.
- The ScanSnap is automatically connected to the computer via wireless LAN and the ScanSnap Manager icon changes to
- Right-click the ScanSnap Manager icon
in the notification area located at the far right of the taskbar and select [Connect by Wi-Fi] from the Right-Click Menu.
- The [ScanSnap Manager - Connect by Wi-Fi] window appears.
- From the list of the ScanSnap units to be connected, select the ScanSnap that you want to connect, and click the [Connect] button.ATTENTION
If the intended ScanSnap for connection does not appear in the list of the ScanSnap units to be connected, refer to the ScanSnap Manager Help.
- The ScanSnap is connected to a computer via wireless LAN and the ScanSnap Manager icon changes to
.
HINTWhen the ScanSnap and a computer are connected via wireless LAN, a notification informs you of the communication status.
- The ScanSnap is connected to a computer via wireless LAN and the ScanSnap Manager icon changes to