Adding or Changing a Wireless Access Point for the ScanSnap Cloud Service
You can add or change a wireless access point that is used for the ScanSnap Cloud service.
For example, if you set up at the wireless access point at work after setting up at the wireless access point at home, perform the following procedure:
- Start the ScanSnap Cloud application.
-
Tap on the main screen.
The navigation bar appears.
-
Tap [Settings].
The [Settings] screen appears.
-
Tap [Add wireless access point/router].
The [Add wireless access point/router] screen appears.
-
Select a ScanSnap scanner that you add a wireless access point to.
The [Add wireless access point/router] screen appears.
- Enter the password for your ScanSnap account.
-
Tap [Authenticate].
The [Scanner settings] screen appears.
-
Tap [Add wireless access point/router].
For the subsequent steps, refer to Setting up with a Mobile Device.
HINT
To change the wireless access point to another wireless access point on the same network, turn off the ScanSnap, and then perform the above procedure.