Disabling the Privacy Separator Function on the Wireless Access Point

To use the ScanSnap, the ScanSnap to be used needs to be registered with the ScanSnap Cloud service. Use the ScanSnap Cloud application to register the ScanSnap.

If you use a mobile device to perform the registration, disable the privacy separator function on the wireless access point. As long as this function is enabled, you cannot perform the registration.

If you cannot disable this function, refer to Setting up with ScanSnap iX500 and a Computer and perform the registration by using a computer.

How to Check

To check the settings of the wireless access point, use a Web browser, dedicated software, or other tools.

If the privacy separator function is enabled, disable it.

For details, refer to the relevant manuals or the Web site of your wireless access point or contact the manufacturer.

Example of Changing the Settings from the Web Browser

HINT

The privacy separator function prevents wireless devices from communicating with each other via a mobile router to further enhance security.

This function may not be disabled, depending on the mobile router.