Setting a Wireless Access Point to the ScanSnap

When you change the wireless access point to which the ScanSnap is connected or when you connect to a wireless access point that is different from the usual one while you are on the go, set a wireless access point.
  1. Tap Navigation Menu on the main screen.

    A navigation bar appears.

  2. Tap [Settings].

    The [Settings] screen appears.

  3. Tap [Add wireless access point/router].

    The [Add wireless access point/router] screen appears.

  4. Select a ScanSnap model that you set the wireless access point to.

    The [Wireless Access Point/Router Setting] screen appears.

  5. Enter the password for your ScanSnap account.
  6. Tap the [Authenticate] button.

    A wireless access point is set to the ScanSnap model.

    If the ScanSnap model is not connected to the Internet, tap [Add wireless access point/router] to connect it to the Internet.


If you change the wireless access point to another wireless access point on the same network, turn off the ScanSnap, and then perform the above procedure.