Connecting to the ScanSnap Directly (By Using WPS) (iX1300/iX100)

If the WPS function is supported for your computer or mobile device, use WPS to connect the computer or mobile device to the ScanSnap directly.

Click a button in the Extended Menu.
- For iX1300
- For iX100
The [Direct connection setting] Screen appears.
Click .
The [Run WPS] Screen (Direct Connect Mode) appears.
Select a WPS method.
Click the [Continue] button.
- If you selected [Push-Button], the [Run WPS] Screen (Push-Button for the Direct Connect Mode) appears.
- If you selected [PIN], the [Run WPS] Screen (PIN for the Direct Connect Mode) appears.
Perform the following, and then click within 2 minutes.
- If you selected [Push-Button], press the push button on the computer or mobile device.
- If you selected [PIN], type in the PIN displayed on the computer or mobile device.
The computer or mobile device is connected to the ScanSnap directly via wireless LAN, and the Connection Result Window appears.
Click the [OK] button.