[Direct connection setting] Screen

iX1300 iX100

This window is used to configure settings for directly connecting a computer or mobile device to the ScanSnap.

This window consists of the following:

Wireless LAN setting

Configure wireless LAN settings for connecting in Direct Connect mode.

The [Wireless LAN setting] screen (for the Direct Connect mode) appears.

IP address setting

Set an IP address for connecting in Direct Connect mode.

The [IP address setting] screen (for the Direct Connect mode) appears.

Run WPS

Run WPS in Direct Connect mode to establish the connection.

The [Run WPS] screen (for the Direct Connect mode) appears.

[Back] button

The Extended Menu appears.