[IP address setting] Screen (Direct Connect Mode)
You can set an IP address for the ScanSnap that you use in Direct Connect mode.
This screen consists of the following:
- IP address
Enter an IP address.
- Subnet mask
Enter the subnet mask.
- [Use DHCP Server] checkbox
Select this checkbox to use the DHCP server.
When this checkbox is selected, you can enter the following items:
- Lease term
Enter a lease term.
- IP address range
Enter an IP address range.
- [Set] button
Sets the specified IP address configuration for the Direct Connect mode.
- [Cancel] button
Cancels the settings.
A confirmation window appears.