This window consists of the following:

Network Name (SSID)

Displays the network name of the wireless access point.

Security protocol

Displays the security protocol set for the wireless access point.

Encryption method

Displays the encryption method set for the wireless access point.

Select another wireless access point

This is for iX2500, iX1600, iX1500, or iX1300.

The [Preparation] Screen appears.

To Establish a Direct Connection

This is for iX1600 or iX1500.

Displays the ScanSnap Help.

Establish a Direct Connection

This is for iX1300.

The screen for completing the direct connection appears.

[Next] button

This is for iX2500, iX1600, iX1500, or iX1300.

Obtains the wireless network configuration of the computer and sets it for the ScanSnap.

[Exit] button

This is for iX2500, iX1600, iX1500, or iX1300.

Exits wireless network setup. Click this button if you want to establish a connection in Direct Connect mode.

[Yes] button

This is for iX100.

Obtains the wireless network configuration of the computer and sets it for the ScanSnap.

A connection result window appears.

ATTENTION

• When the user account control confirmation window appears, click the [Yes] button.

  If you click the [No] button, the [Wireless LAN setting] screen (network list) appears.

• iX100 can use Wi-Fi at 2.4 GHz band only.

[No] button

This is for iX100.

Does not set the wireless network configuration of the computer for the ScanSnap.

The [Wireless LAN setting] screen (network list) appears.