iOS/iPadOS/Android/ChromeOS

Connecting an Additional ScanSnap Unit

Connect an additional ScanSnap unit to a mobile device.

When the ScanSnap is connected, it is registered as a ScanSnap unit that has previously been connected to ScanSnap Home.

Switch between the registered ScanSnap units on ScanSnap Home using the list of ScanSnap units at the top of the ScanSnap Home screen.

  1. Tap Hamburger Menu → [Scanner] in ScanSnap Home to display the [Scanner] screen.
  2. Tap [Scanner setup].
  3. Follow the instructions on the screen that appears to connect the ScanSnap to the mobile device.

The ScanSnap is registered with ScanSnap Home and you can perform a scan.