Replacing the Roller Set
Replace the consumable (Roller Set) of the ScanSnap when the replacement cycle is reached.
The suggested replacement cycle is every 200,000 sheets scanned.
Note that a notification (
) appears on the touch panel of the ScanSnap when the number of sheets scanned reaches 200,000.
Before replacing the consumable, you must turn off the ScanSnap and unplug the power cable from the AC outlet. Not doing so may cause fire or electrical shock.
-
Do not place internal parts such as the brake roller and the pick roller within reach of small children. Doing so may cause injury.
Do not place internal parts such as the pad unit and the pick roller within reach of small children. Doing so may cause injury.
The bottom part of the ScanSnap may become hot when the ScanSnap is being used, but this does not affect ScanSnap operation or cause any physical harm. Be careful not to drop the ScanSnap when carrying it.
-
Remove any documents from the ADF paper chute (cover)
.
-
Reset the current sheet count. Reset the roller set counter.
-
Press
in the home screen on the touch panel to display the [Settings] screen.
-
Press
in the home screen on the touch panel to display the [Settings] screen.
- Press in the home screen on the touch panel to display the [Settings] screen.
-
Press
to display the [Maintenance] screen.
- Press to display the [Maintenance] screen.
-
Press