Check the IP address, DNS server, or MAC address of the ScanSnap on the touch panel.
-
Press
in the home screen on the touch panel of the ScanSnap to display the [Settings] screen. Press 
in the home screen on the touch panel of the ScanSnap to display the [Settings] screen.
-
Press [Wireless settings] to display the [Wireless settings] screen. Press
to display the [Wi-Fi settings] screen.
- Check the wireless settings.
- To check the IP address or DNS server
-
Check that the name of a network which is currently connected, is displayed in [Wireless access point/router setting]
If [Wireless access point/router setting] is disabled or if a network name is not displayed, refer to Connecting the ScanSnap and the Computer Via a Wireless Access Point and connect the ScanSnap to a wireless access point.
Check that the name of a network which is currently connected, is displayed in [Access point connection]
If [Access point connection] is disabled or if a network name is not displayed, refer to Connecting the ScanSnap and the Computer Via a Wireless Access Point and connect the ScanSnap to a wireless access point.
- To check the MAC address
-
Check that [Connection settings] is set to [Access point connection].
If [Connection settings] is set to [Wi-Fi off], press [Connection settings] and set it to [Access point connection].
Check that [Wi-Fi connect mode] is set to [Access point connection] or [Direct connection].
If [Wi-Fi connect mode] is set to [Wi-Fi off], press [Wi-Fi connect mode] and set it to [Access point connection] or [Direct connection]
- Press [Wi-Fi information] to display the [ScanSnap information] screen.
- Check the IP address, DNS server, or MAC address in the [Network] tab.
