Specifying the IP Address of the Computer to Establish a Connection

When no available computer is detected, you can connect to the computer by specifying its IP address.

  1. Tap Settings Button on the [File List] screen or do the same thing on the folder screen with the ScanSnap Sync function set to on.

    The [Settings] screen appears.

  2. Tap a destination under [Connect to].

    The [Connect to] screen appears.

  3. Select [Specify IP address] from [Other].

    The [Specify IP address] screen appears.

  4. Enter the IP address of the computer, and tap the [OK] button.

    Connection is established with the computer of this IP address.