Connecting the ScanSnap to a Mobile Device in Direct Connect Mode (iX1600 / iX1500)
If a wireless LAN environment has not been configured or the ScanSnap cannot establish a connection with a wireless access point, connect the ScanSnap to a mobile device directly in Direct Connect mode.
- Set [Wi-Fi connect mode] to [Direct connection] for the ScanSnap.
- Press
in the home screen on the touch panel of the ScanSnap to display the [Settings] screen.
- Press
to display the [Wi-Fi settings] screen.
- Press [Wi-Fi connect mode] to display the [Wi-Fi connect mode] screen.
- Select [Direct connection].
- Press
twice to display the [Settings] screen.
- Press
- Connect the ScanSnap and a mobile device directly by using a direct connection.
- Press
to display the [Connecting Devices] screen.
- Open the screen for setting the Wi-Fi function on the mobile device.HINT
For details, refer to the manual of the mobile device.
- Enter the network name (SSID) and security key that are displayed in the [Connecting Devices] screen in the window for setting the Wi-Fi function.
- Start up ScanSnap Connect Application on the mobile device, and connect the ScanSnap and the mobile device directly.
For details about how to connect the ScanSnap to a mobile device, refer to the Basic Operation Guide (Mobile Connection).
- Press