Windows/macOS

Resetting the ScanSnap Settings using ScanSnap Home

Reset the ScanSnap settings using ScanSnap Home.

The ScanSnap settings to reset are as follows:

The ScanSnap setting to reset is the auto power off time.

  • Wireless settings

  • Startup Mode

  • Automatic power off time

  • Battery-driven

Windows

  1. Connect the ScanSnap whose settings are to be reset and a computer with a USB cable.
  2. Display the Scan Window of ScanSnap Home on the computer.
  3. Select [Preferences] in the menu that appears when you click Three Dots at the top of the scan window to display the preferences window.
  4. Select the ScanSnap that is connected to the computer from the list of ScanSnap units in [Scanner information] that is located in the [Scanner] tab.
  5. Reset the wireless settings for the ScanSnap.
    1. Click the [Wireless setup] button to start ScanSnap Wireless Setup Tool.

      For details about how to reset the wireless settings for the ScanSnap, refer to the ScanSnap Wireless Setup Tool Help.

  6. Reset the settings for [Startup Mode] and [Automatic power off time]. Reset the setting for [Automatic power off time] Reset the settings for [Automatic power off time] and [Battery-driven].
    1. Click the [Power settings] button to display the [Power settings] window.
    2. Set the power settings to the default values listed below, and then click the [OK] button.

      • Startup Mode: Normal

      • Automatic power off time: 20 minutes

      • Startup Mode: Normal

      • Automatic power off time: 4 hours

      • Automatic power off time: 4 hours

      • Battery-driven: 5 minutes

      Automatic power off time: 4 hours

  7. Click the [OK] button to close the preferences window.

The ScanSnap settings are reset.

Even if you reset the ScanSnap settings, the ScanSnap information will remain in ScanSnap Home. If necessary, remove the ScanSnap information from ScanSnap Home.

macOS

  1. Connect the ScanSnap whose settings are to be reset and a computer with a USB cable.
  2. Display the Scan Window of ScanSnap Home on the computer.
  3. Select [Preferences] in the menu that appears when you click Three Dots at the top of the scan window to display the preferences window.
  4. Select the ScanSnap that is connected to the computer from the list of ScanSnap units in [Scanner information] that is located in the [Scanner] tab.
  5. Reset the wireless settings for the ScanSnap.
    1. Click the [Wireless setup] button to start ScanSnap Wireless Setup Tool.

      For details about how to reset the wireless settings for the ScanSnap, refer to the ScanSnap Wireless Setup Tool Help.

  6. Reset the settings for [Startup Mode] and [Automatic power off time]. Reset the setting for [Automatic power off time] Reset the settings for [Automatic power off time] and [Battery-driven].
    1. Click the [Power settings] button to display the [Power settings] window.
    2. Set the power settings to the default values listed below, and then click the [OK] button.

      • Startup Mode: Normal

      • Automatic power off time: 20 minutes

      • Startup Mode: Normal

      • Automatic power off time: 4 hours

      • Automatic power off time: 4 hours

      • Battery-driven: 5 minutes

      Automatic power off time: 4 hours

  7. Click Close at the top of the window to close the preferences window.

The ScanSnap settings are reset.

Even if you reset the ScanSnap settings, the ScanSnap information will remain in ScanSnap Home. If necessary, remove the ScanSnap information from ScanSnap Home.