Cleaning the (Carrier) Sheet
Clean the (Carrier) Sheet with a dry cloth, or a cloth moistened with Cleaner F1/a mild detergent.
Gently wipe the dirt and dust off the surface and the inside of the (Carrier) Sheet.
As you keep using the (Carrier) Sheet, dirt and dust will accumulate on the surface and the inside. If you keep using it as it is, a problem might occur during a scan, so clean it regularly.
Do not use paint thinner or any other organic solvents.
Do not apply too much force when rubbing. Doing so may damage or deform the (Carrier) Sheet.
Be careful not to leave any crease on the (Carrier) Sheet.
Make sure that the part that holds the front and back sides of the (Carrier) Sheet does not come off when cleaning the inside of the (Carrier) Sheet.
After cleaning the inside of the (Carrier) Sheet with a cloth moistened with Cleaner F1/mild detergent, make sure that it is completely dry before closing the (Carrier) Sheet.
The (Carrier) Sheet should be replaced approximately after every 500 scans.
The Carrier Sheet or Photo Carrier Sheet should be replaced approximately after every 500 scans.
The Booklet Carrier Sheet should be replaced approximately after every 2,500 scans.