Specifications of the ScanSnap

Item	Specification
Product Name	ScanSnap iX1600 ScanSnap iX1500 ScanSnap iX1300
Scanning method	Automatic Document Feeder (ADF), simultaneous duplex scanning Automatic Document Feeder (ADF), single return scanning feeder (Return Scan), simultaneous duplex scanning
Scanning mode	Simplex/duplex, color/gray/black and white/auto (automatic color, gray, and B & W detection)
Optical system/image sensor	Equal-magnification optics/CIS × 2 (front × 1, back × 1)
Light source	3 color LED (Red/Green/Blue)
Touch panel	4.3 inch color display (pressure-sensitive touch panel)
Scanning speed (A4 portrait)	Auto/normal/better/best 40 sheets/minute 30 sheets/minute
Paper size/document thickness	Refer to Documents That Can Be Scanned with the ScanSnap
Number of sheets allowed to be loaded	Up to 50 sheets (A4: 80 g/m² [20 lb]) Up to 20 sheets (A4: 80 g/m² [20 lb])
Interface	USB USB 3.2 Gen 1 (1)/USB 3.1 (1)/USB 3.0 (1)/USB 2.0/USB 1.1 (connector: B type) USB 3.2 Gen 1×1 (1)/USB 3.0 (1)/USB 2.0/USB 1.1 (connector: B type) Wi-Fi (2) IEEE802.11 a/b/g/n/ac (2.4 GHz/5 GHz) (*3)
Input power	Voltage 100 to 240 V ±10% Phase Single phase Frequency range 50/60 Hz
Power consumption	USB connection During operation: 17 W or less During sleep mode: 1.5 W or less During operation: 17 W or less During sleep mode: 1.7 W or less Wi-Fi connection During operation: 17 W or less During sleep mode: 1.6 W or less During operation: 17 W or less During sleep mode: 2.0 W or less
Temperature/humidity allowable ranges	Temperature During operation: 5 to 35 degrees C/41 to 95 degrees F During standby: -20 to 60 degrees C/ -4 to 140 degrees F During storage/transportation: -20 to 60 degrees C/ -4 to 140 degrees F Humidity During operation: 20 to 80% During standby: 8 to 95% During storage/transportation: 8 to 95%
Outer dimensions (Width × Depth × Height)	Min.: 292 × 161 × 152 mm/11.50 × 6.34 × 5.98 in. (when the ADF paper chute (cover) is closed) Max.: 292 × 494 × 293 mm/11.50 × 19.45 × 11.54 in. (when the ADF paper chute (cover) is open and the extension is extended) Min.: 296 × 114 × 87 mm/11.65 × 4.49 × 3.43 in. (when the ADF paper chute (cover) is closed) Max.: 296 × 247 × 242 mm/11.65 × 9.72 × 9.53 in. (when the ADF paper chute (cover) is opened)
Weight	3.4 kg (approx. 7.50 lb) 2.0 kg (approx. 4.41 lb)
Environmental specification	Compliant with the International Energy Star Program, and RoHS Directive

*1:

When the ScanSnap is connected to a USB 3.2 Gen1, USB 3.1 or USB 3.0 port, the ScanSnap may not be recognized by some computers. In this case, connect the USB cable to a USB 2.0 port.

When the ScanSnap is connected to a USB 3.2 Gen1 × 1 or USB 3.0 port, the ScanSnap may not be recognized by some computers. In this case, connect the USB cable to a USB 2.0 port.

*2:

IPv6 is not supported.

*3:

Depending on the country where the ScanSnap is purchased, the ScanSnap may not support the 5 GHz SSID.

Change the settings of the wireless access point so that the 2.4 GHz SSID is used.

Item	Specification
Product Name	ScanSnap iX100
Scanning method	Manual feed (Continuous Document Feeding (CDF) function supported), simplex scanning, two selectable paper paths (U-turn path (1), straight path (2))
Scanning mode	Simplex, color/gray/black and white/auto (automatic color, gray, and B & W detection)
Optical system/image sensor	Equal-magnification optics/CIS × 1
Light source	3 color LED (Red/Green/Blue)
Scanning speed (A4 portrait)	Auto/normal/better/best 5.2 sec/sheet
Paper size/document thickness	Refer to Documents That Can Be Scanned with the ScanSnap
Interface	USB USB 2.0/USB 1.1 (connector: USB Micro-B type) (3) Wi-Fi (4) IEEE802.11 b/g/n (2.4 GHz)
Power source	Li-ion battery (3.7 V/720 mAh)
Power requirement	USB bus power 5 V/0.5 A
Power consumption	During operation: 4.7 W or less During sleep mode: 2.2 W or less
Temperature/humidity allowable ranges	Temperature During operation: 5 to 35 degrees C/41 to 95 degrees F During standby: -20 to 60 degrees C/ -4 to 140 degrees F During storage/transportation: -20 to 60 degrees C/ -4 to 140 degrees F Humidity During operation: 20 to 80% During standby: 8 to 95% During storage/transportation: 8 to 95%
Outer dimensions (Width × Depth × Height)	Min.: 273 × 47.5 × 36 mm/10.75 × 1.87 × 1.42 in. (when the feed guide and output guide are closed) Max.: 273 × 80 × 59 mm/10.75 × 3.15 × 2.32 in. (when the feed guide and output guide are open)
Weight	400 g (approx. 0.88 lb)
Environmental specification	Compliant with the International Energy Star Program, and RoHS Directive

*1:	When the output guide is open.
*2:	When the output guide is closed.
*3:	When the ScanSnap is connected to a USB 3.0 port, the port operates as a USB 2.0 port.
*4:	IPv6 is not supported.

Specifications of the ScanSnap

See also