Enabling ScanSnap Go (For Administrators)

Enabling ScanSnap Go allows anyone to easily use the ScanSnap.

ATTENTION

For details about ScanSnap Go, refer to About ScanSnap Go.

Press in the home screen on the touch panel of the ScanSnap to display the [Settings] screen.
Press [Wireless settings] to display the [Wireless settings] screen.
Check that [Connection settings] is set to [Access point connection] or [Direct connection].

If [Connection settings] is set to [Wi-Fi off], press [Connection settings] and set it to [Access point connection] or [Direct connection].
Press [ScanSnap Go] to display the [ScanSnap Go] screen.
Turn on [Enable ScanSnap Go].

After ScanSnap Go is enabled, the ScanSnap Go icon will appear at the top of the touch panel.

See also