Changing the Connection Method from Direct Connection to Access Point Connection
When a computer is connected to the ScanSnap directly, change the connection method for the computer to an access point connection and connect the computer to the ScanSnap via a wireless access point.
Windows
-
Set the Wi-Fi connect mode for the ScanSnap.
- Press
in the home screen on the touch panel of the ScanSnap to display the [Settings] screen. - Press
in the home screen on the touch panel of the ScanSnap to display the [Settings] screen. - Press [Wireless settings] to display the [Wireless settings] screen.
- Press
to display the [Wi-Fi settings] screen. - Press [Connection settings] to display the [Connection settings] screen. Press [Wi-Fi connect mode] to display the [Wi-Fi connect mode] screen.
- Select [Access point connection].
-
Press
to return to the [Wireless settings] screen.
-
Press
to return to the [Wi-Fi settings] screen.
- Press to return to the [Wi-Fi settings] screen.
- Press
- Connect the ScanSnap to a wireless access point.
-
Press [Select network] to display the [Select network] screen. Press [Access point connect settings] to display the [Connection information configuration method] screen.
Connect the ScanSnap to a wireless access point by performing one of the following:
- By selecting a wireless access point from the list
-
Select [Select an access point].
Press the [Next] button to display the [Select network] screen.
From the list of displayed wireless access points, select a wireless access point that you want to connect to.
Press the [Next] button to display the [Enter connection information] screen.
Enter the information of the wireless access point that you want to connect to and press the [Connect] button.
Enter the information of the wireless access point that you want to connect to and press the [Next] button.
The items which are displayed in the screen differ depending on the security protocol of the wireless access point.
- To perform the authentication with a security key
-
Press the input field for [Security key] and enter the user name, and then press [OK].
- To perform the authentication with a client certificate
-
Press [Client certificate] and select the certificate to be used.
- To perform the authentication with a user ID and a password
-
Press the input field and enter a value for [User ID] and [Password] respectively, and then press [OK].
- To perform the authentication with an external ID
-
Press the input field for [External ID], enter the external ID, and press [OK].
Press the [Complete] button in the [Successfully connected.] screen.
Press the [Complete] button in the [Check Connection Results] screen.
Press
to display the home screen.Press
to display the home screen.
- By entering the information of a wireless access point
-
From the list of wireless access points displayed, press [Add network] at the bottom to display the [Enter connection information] screen.
Select [Configure manually].
Press the [Next] button to display the [Enter connection information] screen.
Enter the information of the wireless access point that you want to connect to and press the [Connect] button.
Enter the information of the wireless access point that you want to connect to and press the [Next] button.
The items which are displayed in the screen differ depending on the security protocol of the wireless access point.
Press the [Complete] button in the [Successfully connected.] screen.
Press the [Complete] button in the [Check Connection Results] screen.
Press
to display the home screen.Press
to display the home screen.
- By using the WPS button of a wireless access point
-
Press the [Use WPS] button to display the [Use WPS] screen.
Select [WPS (button)] and press the [Next] button to display the [WPS (button)] screen.
Select [WPS (button)].
Press the [Next] button.
Press the button for the WPS function on the wireless access point.
The wireless access point is ready to be connected from the ScanSnap.
Go back to the touch panel of the ScanSnap, and press the [Next] button in the [WPS (button)] screen within two minutes.
Press the [Complete] button in the [Successfully connected.] screen.
Press the [Complete] button in the [Check Connection Results] screen.
Press
to display the home screen.Press
to display the home screen.
- By using the PIN code of the WPS function of a wireless access point
-
Press the [Use WPS] button to display the [Use WPS] screen.
Select [WPS (PIN)].
-
Select [WPS (PIN)] and press the [Next] button to display the [WPS (PIN)] screen.
Press the [Next] button to display the [WPS (PIN)] screen.
Take a note of the PIN that is displayed in the screen in case you forget it.
Open the window for setting the WPS for the wireless access point in a computer, and enter the PIN for the ScanSnap.
The wireless access point is ready to be connected from the ScanSnap.
Go back to the touch panel of the ScanSnap, and press the [Next] button in the [WPS (PIN)] screen within two minutes.
Press the [Complete] button in the [Successfully connected.] screen.
Press the [Complete] button in the [Check Connection Results] screen.
Press
to display the home screen.Press
to display the home screen.
-
Press [Select network] to display the [Select network] screen. Press [Access point connect settings] to display the [Connection information configuration method] screen.
- Click the [Network] icon in the notification area of the taskbar on the computer.
- In the window that appears, select the wireless access point which the ScanSnap is connected to.
- Click the [Connect] button.
- Enter the security key in the [Connect to a Network] window and then click the [OK] button.
The connection method has been changed from a direct connection to an access point connection. The computer and the ScanSnap are connected via Wi-Fi using the wireless access point.
macOS
-
Set the Wi-Fi connect mode for the ScanSnap.
- Press in the home screen on the touch panel of the ScanSnap to display the [Settings] screen.
- Press in the home screen on the touch panel of the ScanSnap to display the [Settings] screen.
- Press [Wireless settings] to display the [Wireless settings] screen.
- Press to display the [Wi-Fi settings] screen.
- Press [Connection settings] to display the [Connection settings] screen. Press [Wi-Fi connect mode] to display the [Wi-Fi connect mode] screen.
- Select [Access point connection].
-
Press to return to the [Wireless settings] screen.
-
Press to return to the [Wi-Fi settings] screen.
- Press to return to the [Wi-Fi settings] screen.
- Press
- Connect the ScanSnap to a wireless access point.
-
Press [Select network] to display the [Select network] screen. Press [Access point connect settings] to display the [Connection information configuration method] screen.
Connect the ScanSnap to a wireless access point by performing one of the following:
- By selecting a wireless access point from the list
-
Select [Select an access point].
Press the [Next] button to display the [Select network] screen.
From the list of displayed wireless access points, select a wireless access point that you want to connect to.
Press the [Next] button to display the [Enter connection information] screen.
Enter the information of the wireless access point that you want to connect to and press the [Connect] button.
Enter the information of the wireless access point that you want to connect to and press the [Next] button.
The items which are displayed in the screen differ depending on the security protocol of the wireless access point.
- To perform the authentication with a security key
-
Press the input field for [Security key] and enter the user name, and then press [OK].
- To perform the authentication with a client certificate
-
Press [Client certificate] and select the certificate to be used.
- To perform the authentication with a user ID and a password
-
Press the input field and enter a value for [User ID] and [Password] respectively, and then press [OK].
- To perform the authentication with an external ID
-
Press the input field for [External ID], enter the external ID, and press [OK].
Press the [Complete] button in the [Successfully connected.] screen.
Press the [Complete] button in the [Check Connection Results] screen.
Press
to display the home screen.Press
to display the home screen.
- By entering the information of a wireless access point
-
From the list of wireless access points displayed, press [Add network] at the bottom to display the [Enter connection information] screen.
Select [Configure manually].
Press the [Next] button to display the [Enter connection information] screen.
Enter the information of the wireless access point that you want to connect to and press the [Connect] button.
Enter the information of the wireless access point that you want to connect to and press the [Next] button.
The items which are displayed in the screen differ depending on the security protocol of the wireless access point.
Press the [Complete] button in the [Successfully connected.] screen.
Press the [Complete] button in the [Check Connection Results] screen.
Press
to display the home screen.Press
to display the home screen.
- By using the WPS button of a wireless access point
-
Press the [Use WPS] button to display the [Use WPS] screen.
Select [WPS (button)] and press the [Next] button to display the [WPS (button)] screen.
Select [WPS (button)].
Press the [Next] button.
Press the button for the WPS function on the wireless access point.
The wireless access point is ready to be connected from the ScanSnap.
Go back to the touch panel of the ScanSnap, and press the [Next] button in the [WPS (button)] screen within two minutes.
Press the [Complete] button in the [Successfully connected.] screen.
Press the [Complete] button in the [Check Connection Results] screen.
Press
to display the home screen.Press
to display the home screen.
- By using the PIN code of the WPS function of a wireless access point
-
Press the [Use WPS] button to display the [Use WPS] screen.
Select [WPS (PIN)].
-
Select [WPS (PIN)] and press the [Next] button to display the [WPS (PIN)] screen.
Press the [Next] button to display the [WPS (PIN)] screen.
Take a note of the PIN that is displayed in the screen in case you forget it.
Open the window for setting the WPS for the wireless access point in a computer, and enter the PIN for the ScanSnap.
The wireless access point is ready to be connected from the ScanSnap.
Go back to the touch panel of the ScanSnap, and press the [Next] button in the [WPS (PIN)] screen within two minutes.
Press the [Complete] button in the [Successfully connected.] screen.
Press the [Complete] button in the [Check Connection Results] screen.
Press
to display the home screen.Press
to display the home screen.
-
Press [Select network] to display the [Select network] screen. Press [Access point connect settings] to display the [Connection information configuration method] screen.
- Click the Wi-Fi icon in the status menu of the menu bar on the computer.
- In the window that appears, select the wireless access point which the ScanSnap is connected to.
- When the window for entering a password appears, enter a password and click [Connect].
The connection method has been changed from a direct connection to an access point connection. The computer and the ScanSnap are connected via Wi-Fi using the wireless access point.