[Feed option] Window (When Using ScanSnap Cloud)
The [Feed option] window appears when you click the [Option] button for [Feed] in the [Add new profile] window or the [Edit profiles] window. The scan setting items related to paper feeding can be specified in more detail. The [Feed option] window appears when you click the [Option] button for Feed in the [Add new profile] window or the [Edit profiles] window. The scan setting items related to paper feeding can be specified in more detail.
This section explains the setting items for a profile that is linked with a cloud service or for a profile that is used to send an e-mail by using ScanSnap Cloud. A setting item which is not supported by a cloud service that you established a link with is not displayed or cannot be selected.
This section explains the setting items for a profile that is linked with a cloud service by using ScanSnap Cloud. A setting item which is not supported by a cloud service that you established a link with is not displayed or cannot be selected.
For regions where ScanSnap Cloud can be used, refer to here.
You cannot scan documents with the ScanSnap while the [Feed option] window is displayed.
- Feed mode
Select a feeding method for scanning documents.
The setting has an affect on [Feed mode] in [Scan settings] of the [Add new profile] window or of the [Edit profiles] window.
Normal scan
Scanning automatically finishes when all of the documents loaded in the ScanSnap are scanned.
Scanning automatically finishes when all of the documents are scanned.
Continuous scan
Scans documents continuously in multiple batches.
Select this feeding method to scan documents more than the amount that can be loaded in the ADF paper chute (cover) on the ScanSnap.
Manual scan
Scans documents that are loaded one sheet at a time.
Select this feeding method to scan documents that can be damaged quite easily such as photographs, documents with overlapped areas such as envelopes, or large documents (larger than A4/Letter size) folded in half.
- [ADF] tab/[Manual Feeder] tab
Switch the window for configuring the feeding method for the U-turn Scan in which a document is loaded in the ADF paper chute (cover) or Return Scan in which a document is inserted into the manual feeder.
- Feed mode
[Normal scan] is displayed as the feeding method for scanning documents.
Scanning automatically finishes when all of the documents loaded in the ScanSnap are scanned.
[Continuous scan] is displayed as the feeding method for scanning documents.
Documents are scanned continuously in multiple batches.
The feeding method for scanning documents is displayed.
When the [ADF] tab is selected
[Normal scan] is displayed as the feeding method for scanning documents with U-turn Scan.
Scanning automatically finishes when all of the documents loaded in the ScanSnap are scanned.
When the [Manual Feeder] tab is selected
[Continuous scan] is displayed as the feeding method for scanning documents with Return Scan.
Documents are scanned continuously in multiple batches.
If you scan documents after the first scan, you can use the ADF paper chute (cover) or the manual feeder for scanning.
- [Scanning will not start if the inserted document is skewed] checkbox
-
This is displayed when [Manual Feeder] tab is selected.
If you select this checkbox, when a document is inserted skewed into the manual feeder, an error window appears and the scan is stopped.
This reduces damage to a document when a document is inserted skewed.
A skewed document may not be detected as an error depending on the degree of the skew or the size of the document.
- Document size
Specify the size of documents to be scanned.
Automatic detection
A4 (210 × 297 mm)
A5 (148 × 210 mm)
A6 (105 × 148 mm)
B5 (182 × 257 mm)
B6 (128 × 182 mm)
Postcard (100 × 148 mm)
Business card (90 × 55 mm, 55 × 90 mm)
Letter (8.5 × 11 in., 216 × 279.4 mm)
Legal (8.5 × 14 in., 216 × 355.6 mm)
- [Reduce vertical streaks] checkbox
-
Select this checkbox to reduce vertical streaks that are not on the document, but that appear in a scanned image.
- [OK] button
Applies the configured settings and closes the window.
- [Cancel] button
Cancels the configured settings and closes the window.