The [Scan] Button and the Wi-Fi Indicator Do Not Light Up in Purple
When performing a scan with the ScanSnap by using a profile that is linked with a cloud service, if the [Scan] button and the Wi-Fi indicator do not light up in purple, check the following:
Is the ScanSnap connected to the computer via a USB cable?
Disconnect the USB cable.
Have you changed the connection status of the ScanSnap to Cloud mode?
Change the connection status of the ScanSnap to Cloud mode in the following procedure and check if the problem is solved.
-
Click the [Scan] button at the top of the main window of ScanSnap Home to display the scan window.
If the main window is not already displayed, refer to To Display the Main Window.
-
Click
which is displayed on the right of the scanner name to change the connection status to Cloud mode.
-
Click the [Scan] button at the top of the main window of ScanSnap Home to display the scan window.
If the main window is not already displayed, click the [ScanSnap Home] icon
in the application list that appears when you click Launchpad in the Dock. -
Click
which is displayed on the right of the scanner name to change the connection status to Cloud mode.
Is the ScanSnap connected to the mobile device via Wi-Fi?
If an application used to connect to the ScanSnap (such as ScanSnap Connect Application or ScanSnap Home for iOS/Android) is running on a mobile device, exit the application before connecting the ScanSnap to the computer.
If ScanSnap Connect Application is running on a mobile device, exit the application before connecting the ScanSnap to the computer.
The ScanSnap may not be connected to the wireless access point correctly.
In the following procedure, reset the ScanSnap Wi-Fi settings, and after configuring the Wi-Fi settings again, check that the [Scan] button and the Wi-Fi indicator light up in purple.
In the following procedure, reset the ScanSnap Wi-Fi settings, and after configuring the Wi-Fi settings again, check that the [Scan] button and the Wi-Fi indicator light up in purple.
In the following procedure, reset the ScanSnap Wi-Fi settings, and after configuring the Wi-Fi settings again, check that the [Scan/Stop] button and the Wi-Fi indicator light up in purple.
Use ScanSnap Wireless Setup Tool to reset the ScanSnap Wi-Fi settings, and then configure the Wi-Fi settings again.
Connecting the ScanSnap to a network that can be connected to the Internet is necessary.
For details about how to reset the Wi-Fi settings or how to configure the Wi-Fi settings, refer to the ScanSnap Wireless Setup Tool Help.
For details about how to start ScanSnap Wireless Setup Tool, refer to Configuring the Wi-Fi Settings.
-
Click the [Scan] button at the top of the main window of ScanSnap Home to display the scan window.
If the main window is not already displayed, refer to To Display the Main Window.
-
Select a profile that does not have an established link with a cloud service from the profile list.
-
Select a profile with an established link to a cloud service again, and check that the [Scan] button and the Wi-Fi indicator light up in purple.
Select a profile with an established link to a cloud service again, and check that the [Scan] button and the Wi-Fi indicator light up in purple.
Select a profile with an established link to a cloud service again, and check that the [Scan/Stop] button and the Wi-Fi indicator light up in purple.
Use ScanSnap Wireless Setup Tool to reset the ScanSnap Wi-Fi settings, and then configure the Wi-Fi settings again.
Connecting the ScanSnap to a network that can be connected to the Internet is necessary.
For details about how to reset the Wi-Fi settings or how to configure the Wi-Fi settings, refer to the ScanSnap Wireless Setup Tool Help.
For details about how to start ScanSnap Wireless Setup Tool, refer to Configuring the Wi-Fi Settings.
-
Click the [Scan] button at the top of the main window of ScanSnap Home to display the scan window.
If the main window is not already displayed, click the [ScanSnap Home] icon
in the application list that appears when you click Launchpad in the Dock. -
Select a profile that does not have an established link with a cloud service from the profile list.
-
Select a profile with an established link to a cloud service again, and check that the [Scan] button and the Wi-Fi indicator light up in purple.
Select a profile with an established link to a cloud service again, and check that the [Scan] button and the Wi-Fi indicator light up in purple.
Select a profile with an established link to a cloud service again, and check that the [Scan/Stop] button and the Wi-Fi indicator light up in purple.
If the problem still persists, register the ScanSnap to ScanSnap Cloud by using the ScanSnap Cloud application which is installed on a mobile device.
For details about how to set up and operate ScanSnap Cloud, refer to the ScanSnap Cloud Help.