• HOME
  • ScanSnap Help
  • Troubleshooting
  • Troubles Related to Connections and Communication
  • You Do Not Know the Security Key to Connect Directly to the ScanSnap

You Do Not Know the Security Key to Connect Directly to the ScanSnap

If you do not know the security key to connect directly to the ScanSnap, check the following: If you do not know the security key to connect directly to the ScanSnap, refer to the ScanSnap Wireless Setup Tool Help.

For details about how to start ScanSnap Wireless Setup Tool, refer to Configuring the Wi-Fi Settings.

Check the security key on the touch panel of the ScanSnap.

Check the security key in the following procedure:

  1. Press Settings in the home screen on the touch panel of the ScanSnap to display the [Settings] screen.

  2. Press Wi-Fi settings to display the [Wi-Fi settings] screen.

  3. Check that [Wi-Fi connect mode] is set to [Direct connection].

    HINT
    • If it is not set to [Direct connection], press [Wi-Fi connect mode] and change the setting.

  4. Press Back in the [Wi-Fi settings] screen to display the [Settings] screen.

    Press Back in the [Wi-Fi settings] screen to display the [Settings] screen.

  5. Press Connecting Devices to display the [Connecting Devices] screen.

    Check the security key displayed on the screen.

See also

  • Displayed Screens on the Touch Panel
  • Before Using This Site
  • How to Use This Site
  • Customer Support
  • Cookie Policy

© PFU Limited 2018-2024

  • TOP