• HOME
  • ScanSnap Help
  • Wi-Fi Settings
  • Access Point Connect Settings
  • Authenticating a Wireless Access Point with an External ID

Authenticating a Wireless Access Point with an External ID

To connect the ScanSnap to a wireless access point, authenticate a connection to the wireless access point by entering an external ID.

  1. On the touch panel of the ScanSnap, display the [Enter connection information] screen.
    1. Press Settings in the home screen on the touch panel to display the [Settings] screen.
    2. Press Wi-Fi settings to display the [Wi-Fi settings] screen.
    3. Press [Access point connection] to display the [Access point connection] screen.
    4. Press [Access point connect settings] to display the [Connection information configuration method] screen.
    5. Select [Select an access point].
    6. Press the [Next] button to display the [Select network] screen.
    7. From the list of displayed wireless access points, select a wireless access point that you want to connect to.
    8. Press the [Next] button to display the [Enter connection information] screen.
  2. Press the input field for [External ID], enter the external ID, and press [OK].
  3. Press the [Next] button.
  4. Press the [Complete] button in the [Check Connection Results] screen.
  5. Press Home to return to the home screen.

When the authentication is complete, the ScanSnap is connected to the wireless access point.

See also

  • Displayed Screens on the Touch Panel
  • Before Using This Site
  • How to Use This Site
  • Customer Support
  • Cookie Policy

© PFU Limited 2018-2024

  • TOP