This website is designed to be used with ScanSnap Home 2.xx.
If you are using ScanSnap Home 3.0 or later, refer to here.
Changing the Connection Method from Access Point Connection to Direct Connection
When a computer or mobile device is connected to the ScanSnap by using an access point, change the connection method for the computer or mobile device to a direct connection and connect the computer or the mobile device to the ScanSnap directly rather than via a wireless access point.
This section explains the procedure to change the connection method for the computer and the ScanSnap from an access point connection to a direct connection.
- Set [Wi-Fi connect mode] to [Direct connection] for the ScanSnap.
- Press
in the home screen on the touch panel of the ScanSnap to display the [Settings] screen. - Press
to display the [Wi-Fi settings] screen. - Press [Wi-Fi connect mode] to display the [Wi-Fi connect mode] screen.
- Select [Direct connection].
- Press
twice to display the [Settings] screen. - Press twice to display the [Settings] screen.
- Press
- Press
to display the [Connecting Devices] screen.
The connection method has been changed from an access point connection to a direct connection. The computer and the ScanSnap are connected directly via Wi-Fi.