This website is designed to be used with ScanSnap Home 2.xx.
If you are using ScanSnap Home 3.0 or later, refer to here.
Changing the Frequency for Connecting the ScanSnap
Change the setting of the frequency for connecting the ScanSnap which is used when the scanner is connected to a wireless access point.
TIP
Whether or not 5 GHz Wi-Fi can be used differs depending on the region.
If you use the ScanSnap in a region where 5 GHz Wi-Fi cannot be used, you cannot change the frequency for connecting the ScanSnap.
-
Press
in the home screen on the touch panel of the ScanSnap to display the [Settings] screen.
-
Press
to display the [Wi-Fi settings] screen.
- Press [Access point connection] to display the [Access point connection] screen.
- Press [Frequency for the Connection] to change the frequency for the connection.
-
Press
to return to the home screen.
The frequency for the connection which is set to the ScanSnap is changed.