• HOME
  • ScanSnap Help
  • Wi-Fi Settings
  • Registering a Certificate/ Checking the Wi-Fi Settings
  • Checking the IP address of the ScanSnap

Checking the IP address of the ScanSnap

Check the IP address of the ScanSnap on the touch panel.

  1. Press Settings in the home screen on the touch panel of the ScanSnap to display the [Settings] screen.
  2. Press Wi-Fi settings to display the [Wi-Fi settings] screen.
  3. Check that the name of a network which is currently connected, is displayed in [Access point connection]

    If [Access point connection] is disabled or if a network name is not displayed, refer to Connecting the ScanSnap and a Computer via Wi-Fi and connect the ScanSnap to a wireless access point.

    If [Access point connection] is disabled or if a network name is not displayed, refer to Connecting the ScanSnap and a Computer via Wi-Fi and connect the ScanSnap to a wireless access point.

  4. Press [Wi-Fi information] to display the [ScanSnap information] screen.
  5. Check the [IP address] in the [Network] tab.

See also

  • Displayed Screens on the Touch Panel
  • Before Using This Site
  • How to Use This Site
  • Customer Support
  • Cookie Policy

© PFU Limited 2018-2024

  • TOP