Check the MAC address of the ScanSnap on the touch panel.
-
Press
in the home screen on the touch panel of the ScanSnap to display the [Settings] screen.
-
Press
to display the [Wi-Fi settings] screen.
- Check that [Wi-Fi connect mode] is set to [Access point connection] or [Direct connection].
If [Wi-Fi connect mode] is set to [Wi-Fi off], press [Wi-Fi connect mode] and set it to [Access point connection] or [Direct connection]
- Press [Wi-Fi information] to display the [ScanSnap information] screen.
- Check the [MAC address] in the [Network] tab.