• HOME
  • ScanSnap Help
  • Maintenance
  • Checking Notifications
  • Checking the Notification Displayed on the Touch Panel

Checking the Notification Displayed on the Touch Panel

When the glass inside the ScanSnap is dirty, replacement of consumables is needed, or a newer firmware version is released, a notification is displayed on the touch panel of the ScanSnap.

When there is a notification, Notification appears on Settings.

When a notification is displayed, check the content and take measures accordingly.

  1. Press Settings (notification) in the home screen on the touch panel of the ScanSnap to display the [Settings] screen.
  2. Press Settings (notification) in the home screen on the touch panel of the ScanSnap to display the [Settings] screen.
  3. Press Maintenance (notification) to display the [Maintenance] screen.
  4. Press Maintenance (notification) to display the [Maintenance] screen.
  5. Press the menu on which Notification is displayed.

    When the glass is dirty, Notification is displayed on [Dust detection].

    When the consumables need to be replaced, Notification is displayed on [Check consumable status].

    When a newer version of firmware is released, Notification is displayed on [Update firmware].

  6. Check the content of the notification and then clean the glass, replace the consumables, or update the firmware.
    HINT
    • You can set whether to detect when the glass is dirty and display a notification on the touch panel by selecting [Notify when glass is dirty] in the [Dust detection] screen.

    • You can set whether to display a notification on the touch panel by selecting [Notify when the latest is available] in the [Update firmware] screen when a newer firmware version is released.

See also

  • Daily Care
  • Replacing the Roller Set
  • Updating the Firmware on the Touch Panel
  • Updating the Firmware in ScanSnap Home
  • Before Using This Site
  • How to Use This Site
  • Customer Support
  • Cookie Policy

© PFU Limited 2018-2024

  • TOP