To connect the ScanSnap to a wireless access point, use a client certificate or CA certificate that has been registered on the ScanSnap to authenticate a connection to the wireless access point.
- On the touch panel of the ScanSnap, display the [Enter connection information] screen.
- Press
in the home screen on the touch panel to display the [Settings] screen.
- Press
to display the [Wi-Fi settings] screen.
- Press [Access point connection] to display the [Access point connection] screen.
- Press [Access point connect settings] to display the [Connection information configuration method] screen.
- Select [Select an access point].
- Press the [Next] button to display the [Select network] screen.
- From the list of displayed wireless access points, select a wireless access point that you want to connect to.
- Press the [Next] button to display the [Enter connection information] screen.
- Press [Client certificate] and select the certificate to be used.
- Press the [Next] button to display the [Select network] screen.
- Press the [Complete] button in the [Check Connection Results] screen.
-
Press
to return to the home screen.
When the authentication is complete, the ScanSnap is connected to the wireless access point.