• HOME
  • ScanSnap Help
  • Wi-Fi Settings
  • Registering a Certificate/ Checking the Wi-Fi Settings
  • Registering a Client Certificate or CA Certificate

Registering a Client Certificate or CA Certificate

To connect the ScanSnap to a wireless access point, use a client certificate or CA certificate that has been registered on the ScanSnap to authenticate a connection to the wireless access point.

One certificate for each certificate type (client certificates and CA certificates) can be registered on the ScanSnap.

  1. Connect the ScanSnap and a computer with a USB cable.
  2. Display the Main Window of ScanSnap Home.

    For details, refer to To Display the Main Window.

  3. Select [Settings] in the menu → [Preferences] to display the preferences window.
  4. Select the ScanSnap that is connected to the computer from the list of ScanSnap units in [Scanner information] that is located in the [Scanner] tab.
    HINT
    • The [Scanner] tab can be displayed from the ScanSnap Home menu which appears when you right-click the ScanSnap Home icon in the notification area of the taskbar.

      For details about ScanSnap Home menus, refer to Icon (Indicator for ScanSnap Connection Status) and Menus.

  5. Click the [Wireless setup] button to start ScanSnap Wireless Setup Tool.

    If ScanSnap Wireless Setup Tool cannot be started up, refer to The ScanSnap and a Computer Cannot Be Connected via a USB Cable and take measures accordingly.

  6. Use ScanSnap Wireless Setup Tool to register a certificate on the ScanSnap.

    For details, refer to the ScanSnap Wireless Setup Tool Help.

The certificate is registered on the ScanSnap.

Authenticate the wireless access point with the registered certificate to establish a connection on the touch panel.

  1. Connect the ScanSnap and a computer with a USB cable.
  2. Display the Main Window of ScanSnap Home.

    Click the [ScanSnap Home] icon ScanSnap Home Icon in the application list that appears when you click Launchpad in the Dock.

  3. Select [ScanSnap Home] on the menu bar → [Preferences] to display the preferences window.
  4. Select the ScanSnap that is connected to the computer from the list of ScanSnap units in [Scanner information] that is located in the [Scanner] tab.
    HINT
    • The [Scanner] tab can be displayed from the ScanSnap Home menu which appears when you click the ScanSnap Home icon in the menu bar.

      For details about ScanSnap Home menus, refer to Icon (Indicator for ScanSnap Connection Status) and Menus.

  5. Click the [Wireless setup] button to start ScanSnap Wireless Setup Tool.

    If ScanSnap Wireless Setup Tool cannot be started up, refer to The ScanSnap and a Computer Cannot Be Connected via a USB Cable and take measures accordingly.

  6. Use ScanSnap Wireless Setup Tool to register a certificate on the ScanSnap.

    For details, refer to the ScanSnap Wireless Setup Tool Help.

The certificate is registered on the ScanSnap.

Authenticate the wireless access point with the registered certificate to establish a connection on the touch panel.

See also

  • Authenticating a Wireless Access Point with a Client Certificate
  • Before Using This Site
  • How to Use the ScanSnap Help
  • Customer Support
  • Cookie Policy

© PFU Limited 2018-2023

  • TOP