Saving Images to Any Folder on Your Computer
After checking images of the documents that you scanned with the ScanSnap, specify a file name and a folder as a save destination, and save the images.
-
Open the ADF paper chute (cover)
of the ScanSnap. Hold the right side of the ADF paper chute (cover) 
of the ScanSnap then open it or press the [Scan] button 
. Open the feed guide of the ScanSnap. Press the [Scan] button or [Stop] button on the ScanSnap.
When the ADF paper chute (cover) is opened, the power is turned on.
When the ADF paper chute (cover) is opened or the [Scan] button is pressed, the power is turned on.
Open the ADF paper chute (cover) fully so that the [Scan] button lights up in blue.
When the ADF paper chute (cover) is opened, the extension
will rise automatically.
When the feed guide is opened, the power is turned on.
Press the [Scan] button or [Stop] button on the ScanSnap to turn the power on.
-
Select [Scan to Folder] from the profile list on the touch panel. Select [Scan to Folder] from the profile list .
If [Scan to Folder] is not displayed in the profile list, create a profile in ScanSnap Home. When you create a profile, select [Scan to Folder] for a template profile.
-
Press the [Scan] button to scan the documents. Press the [Scan] button on the touch panel to scan the documents. Press the [Scan/Stop] button to scan the document. Press the [Scan] button to scan the documents.
To scan documents which are longer than 360 mm (14.17 in.), hold down the [Scan] button for 3 seconds or longer.
To scan documents which are longer than 360 mm (14.17 in.), hold down the [Scan] button for 3 seconds or longer.
If the [Scan] button is still flashing in blue when the scanning of documents is complete, press the [Scan] button again to finish the scan.
If the [Scan] button is still flashing in blue when the scanning of documents is complete, press the [Scan] button again to finish the scan.
If the [Scan/Stop] button is still flashing in blue when the scanning of documents is complete, press the [Scan/Stop] button again to finish the scan.
If the power LED is still flashing in blue when the scanning of documents is complete, press the [Stop] button to finish the scan.
The images created from the document that you scanned are saved in the folder that you specified.