Connecting the ScanSnap and the Computer by Using the WPS Button of a Wireless Access Point
To connect the ScanSnap and a computer via Wi-Fi, you need to connect the ScanSnap and the computer to the same wireless access point. When the wireless access point supports WPS, you can connect the ScanSnap to the wireless access point by using the WPS button of the wireless access point.
After the ScanSnap is connected to the wireless access point, you can use the ScanSnap with the computer.
If you are using the ScanSnap for the first time, refer to Setting Up the ScanSnap for the First Time and set up the ScanSnap.
If you use ScanSnap Wireless Setup Tool, the ScanSnap can be easily connected to the same wireless access point which the computer is connected to, by obtaining the Wi-Fi information which is set on the computer.
For details, refer to Connecting the ScanSnap and a Computer by Using the Wi-Fi Information Which Is Configured on a Computer.
- Set [Wi-Fi connect mode] to [Access point connection] for the ScanSnap.
- Press
in the home screen on the touch panel of the ScanSnap to display the [Settings] screen. - Press
to display the [Wi-Fi settings] screen. - Press [Wi-Fi connect mode] to display the [Wi-Fi connect mode] screen.
- Select [Access point connection].
- Press
to return to the [Wi-Fi settings] screen. - Press to return to the [Wi-Fi settings] screen.
- Press
- Connect the ScanSnap to a wireless access point.
- Press
to display the home screen.
- Press
The computer and the ScanSnap are connected via Wi-Fi using the same wireless access point.