Sending a Scanned Image via an E-mail Directly from the ScanSnap
Sending a Scanned Image via an E-mail Directly from the ScanSnap
By using ScanSnap Cloud, send an image created from the document that you scanned to the e-mail address which you registered in a profile in advance.
If you create a profile that has an e-mail address set for the e-mail destination and an e-mail subject, you can send a scanned image directly from the ScanSnap via e-mail without using a computer.
To use ScanSnap Cloud, you need to register a ScanSnap account then sign in to the ScanSnap Cloud service.
Prepare documents to be scanned with the ScanSnap.
Open the ADF paper chute (cover) of the ScanSnap to turn the power on. Hold the right side of the ADF paper chute (cover) of the ScanSnap then open it or press the [Scan] button to turn it on. Open the feed guide of the ScanSnap to turn the power on.
Connect the ScanSnap to a wireless access point.
When the ScanSnap is connected to a wireless access point, proceed to the next step.
Press in the home screen on the touch panel of the ScanSnap to display the [Settings] screen.
Press to display the [Wi-Fi settings] screen.
Check that [Wi-Fi connect mode] is set to [Access point connection].
Press [Access point connection].
Press [Access point connect settings] and connect the ScanSnap to a wireless access point by following the instructions shown on the screen.
After a connection to the wireless access point is established, press to display the home screen.