• HOME
  • ScanSnap Help
  • Wi-Fi Settings
  • Connecting the ScanSnap and a Computer via Wi-Fi
  • Connecting the ScanSnap and the Computer by Entering the Information of a Wireless Access Point

Connecting the ScanSnap and the Computer by Entering the Information of a Wireless Access Point

To connect the ScanSnap and a computer via Wi-Fi, you need to connect the ScanSnap and the computer to the same wireless access point. Enter the wireless access point information (such as the network name and security), and connect the ScanSnap to the wireless access point.

After the ScanSnap is connected to the wireless access point, you can use the ScanSnap with the computer.

HINT
  • If you are using the ScanSnap for the first time, refer to Setting Up the ScanSnap for the First Time and set up the ScanSnap.

  • If you use ScanSnap Wireless Setup Tool, the ScanSnap can be easily connected to the same wireless access point which the computer is connected to, by obtaining the Wi-Fi information which is set on the computer.

    For details, refer to Connecting the ScanSnap and a Computer by Using the Wi-Fi Information Which Is Configured on a Computer.

  1. Set [Wi-Fi connect mode] to [Access point connection] for the ScanSnap.
    1. Press Settings in the home screen on the touch panel of the ScanSnap to display the [Settings] screen.
    2. Press Wi-Fi settings to display the [Wi-Fi settings] screen.
    3. Press [Wi-Fi connect mode] to display the [Wi-Fi connect mode] screen.
    4. Select [Access point connection].
    5. Press Back to return to the [Wi-Fi settings] screen.
    6. Press Back to return to the [Wi-Fi settings] screen.
  2. Connect the ScanSnap to a wireless access point.
    1. Press [Access point connection] to display the [Access point connection] screen.
    2. Press [Access point connect settings] to display the [Connection information configuration method] screen.
    3. Select [Configure manually].
    4. Press the [Next] button to display the [Enter connection information] screen.
    5. Enter the information of the wireless access point to be used and press the [Next] button.

      The items which are displayed in the screen differ depending on the security protocol of the wireless access point.

    6. Press the [Complete] button in the [Check Connection Results] screen.
    7. Press Home to display the home screen.

The computer and the ScanSnap are connected via Wi-Fi using the same wireless access point.

See also

  • Registering a Client Certificate or CA Certificate
  • Setting an IP Address for the ScanSnap
  • Reconnecting the ScanSnap and a Computer by Specifying the IP Address of the ScanSnap
  • Using a Proxy Server for the Internet Connection
  • Displayed Screens on the Touch Panel
  • Before Using This Site
  • How to Use This Site
  • Customer Support
  • Cookie Policy

© PFU Limited 2018-2024

  • TOP